Kako koristiti aanalizator urina
Analizatori urina od velike su vrijednosti u dijagnostici raznih bolesti mokraćnog sustava, probavnog sustava, kardiovaskularnog i endokrinog sustava, promatranju LX-a, procjeni prognoze i zdravstvenoj zaštiti stanovništva. Analizator urina koristi se za otkrivanje urina, a rezultati detekcije imaju performanse točnosti, brzine otkrivanja i anti-unakrsne infekcije.
Kako operirati aanalizator urina
1. Početak:
Uključite glavno napajanje analizatora urina, upravljajte napajanjem zaslona, napajanjem pisača i unesite korisničko ime i lozinku u dijaloški okvir.
2. Priprema prije analize:
①Check whether the distilled water and deionized water are sufficient, whether the waste liquid pipeline is blocked, whether the waste liquid bucket is emptied, check whether the distilled water and deionized water are sufficient, whether the waste liquid pipeline is blocked, and whether the waste liquid bucket is emptied;
②Check whether the high-concentration cleaning tank has enough high-concentration cleaning solution;
③Check the sample needle, check reagent needle, check sample stirring needle and reagent stirring rod, and confirm that there is no dirt or bending. If dirty, clean the sample needle. If bent, replace the sample needle. If there is dirt, clean the stirring rod;
④ Calibration, preparation of quality control products.
3. Pokreni otkrivanje:
①Calibration: Place the kit calibrators for blood glucose, urea, creatinine, uric acid, and protein in the corresponding positions, click to start calibration;
②Quality control test: place it in the corresponding position and click to start the test, all items are under control for sample test;
③ The specimen is checked, and the number is placed in the corresponding detection position;
④Click the application item to apply for inspection, and click the start button to perform the inspection;
⑤Enter information in the system;
⑥ Review, print and issue reports.
4. Isključivanje:
When the urine analyzer is in the "idle" state, you can click Shut Down and follow the prompts to select "Exit" to perform the shutdown operation;
